Injection

Contract for Services

4500 Highlands Parkway • Smyrna • GA • 30082 • 678-290-1325

Date of Issue:

9/28/2023

Customer Information -

Jobsite Information

Nicole Thibo

Nicole Thibo 600 Winnmark Drive

Name:

Contact Name:

Roswell 600 Winnmark Drive

Address:

Address:

State: Ga

Zip: 30076

Roswell

State: Ga

Zip: 30076

City:

City:

Phone:

Phone:

Cell: (678) 296-2160

Cell: (678) 296-2160

nicthm@yahoo.com

nicthm@yahoo.com

Email:

Email:

POLYURETHANE CRACK INJECTION WITH DRYWELL 1. Drill a series of ½” holes bisecting the crack along poured foundation wall. 2. Break into the concrete floor to create a drywell. 3. Install injection ports/tubes in each hole. 4. Inject expandable polyurethane resin into each port to fill and seal crack. 5. Remove ports and surface seal along the crack using epoxy. 6. Install a sealed moisture barrier from the top of the foundation wall into the drywell. 7. Install concrete over the drywell to make the slab floor flush again. 8. Clean work area and remove all work related debris.

NOTE: See terms and conditions for additional information. Crack injections carry a 10 year warranty against further leakage through repaired area. Waterproofing warranty covers area where injection is installed. If additional leakage occurs outside of treated area additional repairs will be required at additional cost. Homeowner is to move all personal items 4 feet away from work area prior to installation.

Applicable Warranty – see terms and conditions in the attached warranty addendum

Waterproofing Warranty

Structural Warranty

Triple Protection Warranty

Payment Schedule

$1,065.00

Deposit

Total Contract Amount

$4,260.00

$3,195.00

Due Upon Completion

Quotation valid for 30 days from the date of issue. Contract subject to terms and conditions printed on the accompanying addenda.

Presented by ESOG

Accepted by the Customer

ESOG Signature

Date

Customer Signature

Date

Kenny Tortorello

form revision 12/04/12